N95 Respirator Soft-Vertical Flat- Foldable Face Mask 

BYD- N95 NIOSH Approved


“Soft Vertical Flat- Foldable Face Masks represents a Game-changer for the personal health and comfort of our heroic and brave frontline workers"

The N95 Respirator is designed to help provide respiratory protection for the user. This product has a filter efficiency of 95% or greater against solid and liquid aerosols free of oil.

This product contains no components made from natural rubber latex.

  • High Pressure Synthetic Blood Resistance. Protects wearer from exposure to airborne diseases such as COVID-19, influenza, or TB.
    Designed to provide a maximum barrier protection with a close facial fit and very efficient filtration of airborne particles

  • Fluid Resistance – ASTM F 1862 approved (Nelson Labs)Meets NIOSH 42 CFR 84 N95 requirements for a minimum 95% filtration efficiency against solid and

  • liquid aerosols that do not contain oil

  • Meets NIOSH and Nelson Labs CFR 84.180

  • Inhalation/Exhalation resistance tests

  • Meets NIOSH CFR 84.181 Sodium Chloride (NaCl) – N95

  • Particle Filtration Efficiency (PFE) = 99.9% @ 0.1 micron

  • PFE – ASTM F 1215-89 approved (Nelson Labs)

  • Flammability (Flame Spread) tested (Class 1)

  • CPSC CS-191-53 and 16 CFR 1610 approved (Nelson Labs)CDC / FDA / NIOSH Approved TC-84A-9221

  • Latex free

“Instructions for use"

  • Suitable for protecting the mouth, nose, and chin to airborne particles, and block liquid aerosols, blood, body fluids and secretions. 

  • For adult use only

  • Do not wash 

  • Store in a cool, dry, clean, place away from fire and contamination.

  • Store between -20°C  and 38°C (-4°F and 100°F) with relative humidity below 80%

  • Expiration date: 2 years after production

- 3- Step Check before use -

  1.  Do not use if the packaging has been opened or damaged.

  2. Check if the elastic bands are in good condition and not damaged.

  3. Check that the metallic strip is not broken

“Wearing Instructions"

Please note, the below are cleaning and washing guidelines 

and not medical recommendations.

  • Unfold the mask and hold it with both hands, with the metallic strip facing up. 

  • Place elastic bands around the neck and head respectively. Put the mask against your face covering both nose and mouth.

  • Adjust the metallic strip over the bridge of the nose by using two fingers to press down until achieving a close fit. 

  • Perform a fit test according to instructions.

TBG Tech Co.png

©2020 by TBG Tech Co. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, logos, and brands are for promotion purposes only under limited approvals by our PPE Manufacturers and Suppliers..